What should I do if the edible oil filling machine drips?

What should I do if the edible oil filling machine drips?

1. The reason may be that the ball valve in the filling head is damaged or not tight. At this time, we have to check the ball valve in the filling head. If the ball valve in the filling head is damaged, the ball valve needs to be replaced.

2. The cause of the oil leakage may also be that the o-ring in the angle seat valve in the liquid filling machine is corroded or severely worn. This requires us to repair the o-ring.

3. In the case of 100ml or 500ml edible oil filling machine, if there is liquid leakage from the liquid outlet at the lower end of the piston, the cylinder barrel should be disassembled to replace the random sealing ring. But the need to pay attention to the seal ring with wherein φ65 ×3.1 acid and alkali seal.

4. If the inner and outer tubes are not clean and jammed when the syringe is assembled, the syringe needs to be removed for cleaning or replaced with a new one.

5. In addition , we need to observe whether the filling nozzle orifice of the filling machine is damaged. As for the solution if it is damaged here, it is necessary to repair or replace the orifice of the filling nozzle. The diameter of the orifice cannot be greater than 7.5mm . After repairing the aperture, gently smooth the surface of the orifice on water sandpaper.